Faux Concrete Walls: A Stylish Design Solution

Faux concrete walls are inexpensive and simple to install to make your house look more attractive. This method employs a concrete overlay and stencil for transforming plain plaster to brick-like characteristics.

GBS Penetrating Sealer protects substrates by filling gaps in molecules. This makes it a superior choice for substrates such as brick, stucco or concrete.


If you’re looking for the appearance of concrete walls but don’t have the time or money to build them, think about the use of fake wall panels. These panels are simple to keep clean and are lightweight having polyurethane coatings on the surfaces. Installing them is not necessary and you’ll be able to save costs on installation by a professional and can transform your room your self.

Also, you can achieve an appearance similar to a concrete wall with paint or drywall cement. These are cheaper than concrete resurfacer, but they might not be able to provide the same look.

LOFT Raw is a quick and easy application of a concrete-look interior wall finish that provides modern urban appeal. It’s a great alternative to wall paint made of cement as well as the top option after raw concrete. When applying it, make sure to moisten the wall using the help of a sponge (work on +20-30 sqft at each time). Use a stainless-steel trowel after applying LOFT RAW, to give a “raw finish”.

Best Sealant for Faux Concrete

The most effective method of sealing your fake concrete walls is using a penetrating sealer, such as Enhancer Shield, which is offered in water- as well as solvent-based formulas huong dan son gia da. It is a liquid that saturates the concrete’s surface, making it to block moisture as well as de-icing salts without changing texture or damaging the surface. It is an excellent solution for outdoor surfaces since it can greatly cut down the risk of freeze-thaw or spalling, as being able to stop the growth of mildew as well as staining.

Decorative painting

To apply it, scrape off the peeling paint, sand or scratch the concrete, should it be required (it’s normally not) then rinse, and allow to dry thoroughly. Then apply two coats using the brush, a 1/4-inch nap roller or pump sprayer, waiting for 10 minutes between applications. It will be dry to the touch after four hours. It’s ready for going for a drive or walking in the span of an hour and completely waterproof after 72 hours. This is a long-lasting, inexpensive option for securing concrete floors.

Faux Concrete Wall Maintenance

These faux concrete panels bring a fresh look to your home. They are a great choice for those looking to get the appearance of concrete, but don’t have the time or funds to construct genuine concrete walls. These panels are also rated as fire-proof and come with excellent weather resistance.

As opposed to real concrete, faux concrete panels do not need to be placed in molds and can be cleaned easily. Polyurethane is used to make faux concrete panels. This durable material can keep scratches from being impacted and also resists impact. They can be washed with a towel for a fresh look.

The pillar section on the west wall is getting renewed with cement and will fix a lot of holes and the areas that have been eroded. It will take about 2 days.

Protecting Faux Concrete Surfaces

Concrete is durable robust, durable and extremely resistant material used for a assortment of industrial purposes. But it’s not impervious and, if left untreated with the proper care and protection, industrial concrete surfaces can easily be sucked into the hands of environmental trolls.

Concrete surfaces must be secured from moisture-related damage, regardless of whether they’re used for flooring, countertops or walls. There are a variety of well-tested methods of making sure that concrete surfaces are protected. The most effective solution will be contingent on your specific conditions that you live in, therefore it is essential to consult a concrete surface protection expert prior to selecting the right product beneficial in the area you are working.

The addition of decorative painting on concrete surfaces can produce a stunning effect. Faux finisher Kim Longoa transforms an outdoor concrete patio into a comfortable and carpeted area for relaxing by employing adhesive stencils and applying stains. Stenciling as well as faux finishing are also used to make an edging path for slate that wraps through red pavers, and around the appearance of a lily pool.

You May Also Like

More From Author